Parking Brake Override Bypass
Parking Brake Override Bypass Fully Automatic Video in Motion for Pioneer Models AVH-X1500DVD AVH-X2500BT AVH-X3500BHS AVH-X4500BT AVH-X5500BHS
Parking Brake Override Bypass
- Pioneer Custom Bypass Made for 2013 AVH Video Units (Double Pulse)
- No Programing Required Makes Installation Easy!
- Automatic Parking Brake Override Bypass
- Video in Motion Activation Simple 1 Minute Installation!
- All Connections Made at the Back of the Radio
Parking Brake Override Bypass
Specifically Designed for Pioneer AVH-X1500DVD AVH-X2500BT AVH-X3500BHS
AVH-X4500BT AVH-X5500BHS Radios Automatic Parking Brake Override Bypass
for Video in Motion Activation Interface and Simple How to Install
Instructions Included
Parking Brake Override Bypass
I bought the Micro Bypass parking brake bypass for my recently installed
Pioneer AVH-X5500BHS. It does exactly what it's supposed to do and now I
(or my passengers) can access features that were previously disabled,
such as certain Bluetooth phone functions.
The only issue I had
was with installation. I interpreted the instructions a little different
than the seller intended but he was very responsive and quick in email.
We figured out the issue and I had it fixed in no time. If you do buy
this the install is simple but keep this in mind:
1) Don't use Scotch connectors or other such devices. Twist the bare wires directly together and solder or wire nut.
2) Blue wire from Micro Bypass splices into blue/white wire from radio
3) Black wire from MB splices into ground from radio (has to share this ground, no other)
4)
Green wire from MB - There is a light green wire that runs from the
radio to the parking brake switch or the wire from that switch.
Disconnect the light green from the parking brake wire or switch and
connect it to the green wire from the MB. In other words, the light
green wire from the radio should be connected to the green wire on the
MB AND NOTHING ELSE.
Follow these simple rules and steps and you'll be good to go.
Parking Brake Override Bypass
My microbypass worked perfectly with my new Pioneer AVH-X8500BHS for a
few days until I found an issue with it... it won't work with the
headlights on. Since the microbypass's 3 signals are 1.) Remote Turn-on
2.) Parking-brake signal and 3.) Ground, I'm not sure what would
trigger the Pioneer AVH-X8500BHS to not allow video with the headlights
on unless the newer units also have some logic related to the
illumination signal going the headunit. Still need to troubleshoot this
some more. It might just be a voltage drop since I'm also tying the
Remote Turn-on to my power antenna signal and trying to use it to
actually turn on my amp in the trunk.
Update (7 May 2013): I
rewired my wires and everything works again. The Pioneer amp turn-on
signal is limited to 300mA@12VDC, but the Microbypass takes a small
current draw to get working. It must have been my Rockford Fosgate amp
or the powered antenna that was drawing more current. I now have the
signal going to a relay so everything works as expected.
Parking Brake Override Bypass
The product works flawlessly. Very easy three wire installation that
took about 5 minutes. Now I'm able to access all of the features for my
avh-x5500bhs.
Parking Brake Override Bypass
